Skip to main content
Log in
Microchip Technology DSC1001DI5-016.3840T — Crystals & Oscillators

DSC1001DI5-016.3840T MEMS Oscillator – Microchip, 16.384 MHz

MPNDSC1001DI5-016.3840T
Active

Microchip DSC1001DI5-016.3840T, XO (Standard) MEMS oscillator, 16.384 MHz, CMOS output, ±10 ppm stability, AEC-Q100 qualified, -40 to +85°C, 4-SMD no-lead package.

Microchip Technology DSC1001DI5-016.3840T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DI5-016.3840T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency16.384 MHz
Frequency stability±10ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1001DI5-016.3840T is a MEMS-based XO (Standard) oscillator from Microchip's DSC1001 series, delivering a 16.384 MHz CMOS output with ±10 ppm frequency stability. Rated for -40 to +85°C with AEC-Q100 qualification, this part is suited for under-hood or cabin electronics in passenger vehicles, as well as outdoor telecom and factory-floor equipment that must start reliably at cold temperatures.

Standby power-down function

The oscillator includes a Standby (Power Down) function — when the enable pin is pulled low, the output is disabled and the current draw drops to 15 µA max, versus 6.3 mA max when running.

Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm — a compact footprint that fits tight PCB layouts. The supply voltage range is 1.8V to 3.3V, covering common digital core and I/O rails without an external regulator.

Frequently asked questions

Is DSC1001DI5-016.3840T a direct replacement for DSC1001AI5-016.3840T?

The evidence does not list an AI5 variant or a cross-reference. Both share the DSC1001 base product number, but without a documented pin-to-pin or function match, treat them as separate order codes. Confirm the BOM position's package and function before substituting.

Does DSC1001DI5-016.3840T support standby power down?

Yes — the function is listed as Standby (Power Down). When enabled, the disable current is 15 µA max, compared to 6.3 mA max operating current.

Is DSC1001DI5-016.3840T qualified for automotive (AEC-Q100)?

Yes, it carries AEC-Q100 ratings, which means it has passed automotive-grade temperature cycling, ESD, and reliability stress tests.