Microchip DSC1001 series MEMS-based XO (Standard), 12 MHz CMOS output, ±10 ppm stability, 1.8V–3.3V supply, -40°C to 85°C, AEC-Q100 qualified, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 12 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001DI5-012.0000T is a MEMS-based oscillator delivering a 12 MHz CMOS output with ±10 ppm frequency stability, operating from a 1.8V to 3.3V supply rail.
The 4-SMD, no-lead package measures 2.50 mm × 2.00 mm with a seated height of 0.90 mm max – a compact footprint that saves board space but requires careful solder-paste stencil design to avoid tombstoning on reflow.
Yes – the DSC1001DI5-012.0000T is a drop-in replacement for a 12 MHz quartz oscillator in the same 4-SMD footprint, provided your circuit expects a CMOS-level clock input. The MEMS core offers better jitter and shock resistance than a quartz crystal, and the ±10 ppm stability covers most MCU and CAN bus timing requirements. No external load capacitors are needed.