Microchip DSC1001DI5-011.0592, a MEMS-based XO (Standard) oscillator, 11.0592 MHz CMOS output, 1.8V–3.3V supply, AEC-Q100 qualified, -40°C to 85°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 11.0592 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The 1.8V to 3.3V supply range lets you run the same oscillator on a 1.8V MCU I/O bank or a 3.3V peripheral bus without a level shifter — one BOM line covers both rails.
Housed in a 4-SMD no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm, this oscillator fits tight PCB stacks in handheld or module designs.
Yes, it carries AEC-Q100 rating, which qualifies it for automotive-grade applications including under-hood and cabin electronics.
Yes, it includes a Standby (Power Down) function. When the enable pin is pulled low, the oscillator stops and draws only 15 µA max, making it suitable for battery-powered or sleep-mode applications.