Microchip Technology DSC1001DI5-008.1920, MEMS-based XO (Standard), 8.192 MHz CMOS output, ±10 ppm stability, 1.8V~3.3V supply, AEC-Q100 rated, -40°C~85°C, 4-SMD No Lead 2.50mm x 2.00mm package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 8.192 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The 4-SMD No Lead package (2.50mm x 2.00mm footprint) is a standard oscillator land pattern; the 0.90mm seated height leaves room under a conformal coat or potting.
Operating from 1.8V to 3.3V, this single part covers 1.8V, 2.5V, and 3.3V logic rails — one BOM line serves multiple board variants. Active mode draws 6.3 mA max at 8.192 MHz — low enough for a CAN transceiver or sensor module running off a 3.3V LDO.
Availability confirmed at RFQ.
The Standby function disables the output and drops supply current to 15 µA max, allowing the oscillator to be gated off during system sleep without a separate power switch.
Yes — it is a drop-in MEMS replacement for a quartz XO in the same 4-SMD No Lead 2.5x2.0mm footprint, with CMOS output and ±10 ppm stability. No external load capacitors are needed.