Microchip DSC1001DI5-005.0196, XO (Standard) MEMS oscillator, 5.0196 MHz CMOS output, ±10 ppm stability, AEC-Q100, -40°C to 85°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 5.0196 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001DI5-005.0196: Its AEC-Q100 qualification means it meets automotive reliability stress and temperature-grade requirements — suitable for under-hood or chassis-domain clock trees where a quartz crystal would need external load caps and a separate oscillator IC.
No pin-compatible second source is confirmed, but the DSC1001 series shares the same 4-SMD no-lead footprint across frequencies, so a frequency variant swap is a firmware change, not a board spin.
Yes, the DSC1001DI5-005.0196 carries an AEC-Q100 rating, meaning it has passed automotive-grade reliability stress and temperature qualification. It is suitable for under-hood, cabin, and chassis-domain applications where the ambient temperature stays within -40°C to 85°C.
Yes, the oscillator includes a Standby (Power Down) function. When the standby pin is asserted, the output is disabled and the supply current drops to 15 µA max, allowing the system to save power during idle or sleep modes.