Microchip Technology DSC1001DI5-002.4576T, XO (Standard) MEMS oscillator, 2.4576 MHz CMOS output, ±10 ppm stability, 1.8V–3.3V supply, AEC-Q100, -40°C to 85°C, 4-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 2.4576 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001DI5-002.4576T is a MEMS-based XO (Standard) oscillator from Microchip's DSC1001 series, delivering a fixed 2.4576 MHz CMOS output — a common frequency for UART baud-rate generation, CAN bus timing, and low-speed microcontroller clocks. The 1.8V to 3.3V supply range lets it run off a 1.8V core rail or a 3.3V I/O rail without a level translator, simplifying the power tree.
The oscillator outputs a fixed 2.4576 MHz CMOS signal. This frequency is commonly used for UART baud-rate generation and CAN bus timing.
This covers under-hood and cabin environments.
Yes, the function is listed as Standby (Power Down). When disabled, the maximum supply current drops to 15 µA, enabling low-power sleep modes in battery-backed or automotive systems.