Microchip DSC1001DI3-133.0000, XO (Standard) MEMS oscillator, 133 MHz CMOS output, AEC-Q100 rated, -40°C to 85°C, 1.8V–3.3V supply, 4-VDFN package
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 16.6mA |
| Current - supply (Disable) | 15µA |
| Frequency | 133 MHz |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-VDFN |
| Absolute pull range | ±20ppm |
This makes the part viable for battery-backed modules that wake on a CAN or LIN edge. The supply voltage accepts 1.8V to 3.3V, covering the common 3.3V and 1.8V logic rails without an external regulator.
Housed in a 4-VDFN package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. MSL rating is typical for MEMS oscillators — confirm with the datasheet before bake decisions.
Yes, the Standby (Power Down) function reduces supply current to 15 µA max, compared to 16.6 mA max active. The output is disabled during standby.
Yes, it carries AEC-Q100 ratings, making it suitable for automotive applications where the qualification is required.
The DSC1002 is a functionally similar MEMS XO from Microchip but typically offers a different frequency stability grade or output drive strength. For a direct parametric contrast, refer to the DSC1001 vs DSC1002 datasheet comparison table. The DSC1001DI3-133.0000 is a standard stability (±20 ppm APR) variant.