Microchip DSC1001DI2-128.0000B, MEMS-based XO (Standard), 128 MHz CMOS output, ±25 ppm stability, 1.8-3.3 V supply, AEC-Q100 qualified, -40 to 85 °C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 128 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Supply voltage spans 1.8 V to 3.3 V, so the same order code covers 1.8 V, 2.5 V, and 3.3 V logic rails without a separate voltage-variant BOM line.
Housed in a 4-SMD no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm — footprint-compatible with standard quartz oscillators of the same pad layout, so a board designed for a quartz XO can load this MEMS part without a layout change.
Yes, if the quartz oscillator uses the same 4-SMD no-lead footprint (2.50 mm x 2.00 mm) and runs on a 1.8-3.3 V supply. The MEMS output is CMOS, so the load capacitance and termination match a quartz CMOS oscillator. The AEC-Q100 rating adds automotive reliability that quartz may lack.