Skip to main content
Log in
Microchip Technology DSC1001DI2-048.0000 — Crystals & Oscillators

DSC1001DI2-048.0000 MEMS XO 48 MHz CMOS AEC-Q100 Microchip

MPNDSC1001DI2-048.0000
Active

Microchip Technology DSC1001 series, XO (Standard) MEMS oscillator, 48 MHz CMOS output, ±25 ppm stability, 1.8V–3.3V supply, -40°C to 85°C, AEC-Q100, 4-SMD no-lead package.

$0.9450Ref. price · indicative, final on quote
Microchip Technology DSC1001DI2-048.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DI2-048.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply7.2mA
Current - supply (Disable)15µA
Frequency48 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1001DI2-048.0000 is a MEMS-based XO (Standard) oscillator from Microchip's DSC1001 series, delivering a fixed 48 MHz CMOS output with ±25 ppm frequency stability. It operates from a 1.8V to 3.3V supply and draws a maximum of 7.2 mA, with a standby (power-down) mode that cuts consumption to 15 µA. The 4-SMD, no-lead package measures 2.50 mm x 2.00 mm with a seated height of 0.90 mm.

Package footprint and board layout notes

The 4-SMD, no-lead package has a 0.098" x 0.079" (2.50 mm x 2.00 mm) footprint with a 0.035" (0.90 mm) seated height. The four pads are on the bottom — no leads to bend. The small footprint leaves room for decoupling caps close to the supply pin; a 0.1 µF ceramic right at the pad keeps the supply clean for the MEMS core. No thermal pad or exposed paddle — the package relies on the PCB copper for heat sinking.

Microchip lists the DSC1001DI2-048.0000 as Active.

Frequently asked questions

Can I use the DSC1001DI2-048.0000 as a replacement for a 48 MHz quartz crystal oscillator?

Yes, if the existing quartz oscillator has a CMOS output and a 4-pin, no-lead footprint. The MEMS resonator inside the DSC1001 is more shock- and vibration-tolerant than a quartz crystal — a direct benefit in automotive or industrial environments. Confirm the supply voltage (1.8V–3.3V) and frequency stability (±25 ppm) match your design's timing budget.

What is the footprint of the DSC1001DI2-048.0000?

The package is a 4-SMD, no-lead with dimensions 2.50 mm x 2.00 mm and a seated height of 0.90 mm. The four bottom pads match the standard 4-pin MEMS oscillator land pattern — no special via-in-pad or thermal relief required.