Microchip Technology DSC1001DI2-037.4000T, XO (Standard) MEMS oscillator, 37.4 MHz CMOS output, ±25 ppm stability, 1.8V–3.3V supply, AEC-Q100, 4-SMD no-lead package, Tape & Reel.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 37.4 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Supply voltage spans 1.8V to 3.3V, so the same part number works across 1.8V, 2.5V, and 3.3V logic rails without a separate regulator or level translator.
For a battery-powered ECU that spends most of its life asleep, the 15 µA disable current keeps the quiescent load well under the microamp budget, extending sleep time between charge or replacement cycles.
Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm.
The standby (Power Down) function disables the oscillator output and reduces current consumption to a maximum of 15 µA. When the standby pin is asserted, the output goes high-impedance and the internal MEMS resonator stops, cutting active-mode draw from 7.2 mA down to the microamp level.
Yes, the DSC1001DI2-037.4000T carries an AEC-Q100 rating, meaning it has passed automotive-grade reliability testing including temperature cycling, ESD, and latch-up.