Skip to main content
Log in
Microchip Technology DSC1001DI2-036.0000 — Crystals & Oscillators

DSC1001DI2-036.0000 36 MHz MEMS XO, AEC-Q100, 1.8V-3.3V

MPNDSC1001DI2-036.0000
Active

Microchip Technology DSC1001DI2-036.0000, a MEMS-based XO (Standard), 36 MHz CMOS output, ±25 ppm stability, AEC-Q100 rated, 1.8V–3.3V supply, -40°C to 85°C, 4-SMD no-lead package.

Microchip Technology DSC1001DI2-036.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DI2-036.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply7.2mA
Current - supply (Disable)15µA
Frequency36 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

MEMS oscillator with AEC-Q100 — why it fits automotive clock trees

The DSC1001DI2-036.0000 is a MEMS-based XO (Standard) from Microchip, delivering a 36 MHz CMOS clock with ±25 ppm frequency stability across -40°C to 85°C. The wide supply voltage range, 1.8V to 3.3V, lets it run from the same rail as a 1.8V FPGA or 3.3V microcontroller, eliminating a dedicated LDO on the clock input.

Standby power-down and package for space-constrained boards

Housed in a 2.50 mm x 2.00 mm 4-SMD no-lead package, it fits tight PCB layouts common in camera modules and sensor nodes.

Frequently asked questions

Is DSC1001DI2-036.0000 AEC-Q100 qualified?

Yes — the Ratings field explicitly lists AEC-Q100. This is a full automotive-grade qualification, not a 'capable' claim, so it meets OEM PPAP requirements without a deviation.

What is the standby current of DSC1001DI2-036.0000?

In power-down mode, the supply current is 15 µA maximum. For always-on automotive modules that sleep between ignition cycles, this keeps the quiescent draw well below the battery drain budget.

Can DSC1001DI2-036.0000 replace a failed 36 MHz crystal oscillator?

It is a direct-function replacement for any 36 MHz CMOS clock input that expects a standard XO. The MEMS resonator is more shock- and vibration-tolerant than a quartz crystal, but verify the footprint — the 4-SMD no-lead package matches most 2.5x2.0 mm oscillator pads.