Microchip DSC1001DI2-028.6363T, XO (Standard), 28.6363 MHz CMOS output, ±25 ppm stability, 1.8V~3.3V supply, AEC-Q100 qualified, standby power-down, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 28.6363 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Maximum active current is 7.2 mA at 28.6363 MHz; the standby current of 15 µA preserves battery life in intermittently powered automotive modules like TPMS or seat controllers.
Housed in a 2.50 mm x 2.00 mm 4-SMD no-lead package with a seated height of 0.90 mm — footprint compatible with standard quartz XO pads, so a MEMS-for-quartz swap fits the same PCB land pattern.
Yes, because the output is standard CMOS and the 4-SMD no-lead footprint matches the common quartz XO land pattern. The MEMS resonator is inherently more shock- and vibration-tolerant than quartz, which matters for automotive and industrial environments. Confirm the supply voltage (1.8V~3.3V) and frequency stability (±25 ppm) meet your timing budget before swapping.