Microchip Technology DSC1001DI2-026.0000, DSC1001 series, XO (Standard) MEMS oscillator, 26 MHz CMOS output, ±25 ppm stability, AEC-Q100 qualified, standby (power down) function, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 26 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Operating from 1.8V to 3.3V, the oscillator runs directly off a 1.8V core rail or a 3.3V I/O rail without an intermediate regulator — the wide range covers both low-power and legacy logic families.
Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm, the DSC1001DI2-026.0000 fits tight PCB layouts where a standard 7x5 mm crystal oscillator would not.
Yes. The function is listed as Standby (Power Down). When the enable pin is low, the oscillator stops and draws 15 µA max, letting the system gate the clock without an external switch.
Yes. The ratings include AEC-Q100, which means the part has passed automotive-grade reliability testing for temperature, ESD, and latch-up. It is suitable for under-hood and cabin automotive applications.
The output is CMOS. The supply voltage range is 1.8V to 3.3V, so it can be powered from a 1.8V core rail or a 3.3V I/O rail without a level translator.
The DSC1001DI2-026.0000 is a MEMS-based XO (Standard) with a built-in resonator, not a bare crystal. It can replace a crystal + load-capacitor pair in a clock circuit if the downstream device accepts a CMOS clock input at 26 MHz. Verify the input threshold and drive level compatibility on your specific IC.