Skip to main content
Log in
Microchip Technology DSC1001DI2-024.0004T — Crystals & Oscillators

DSC1001DI2-024.0004T MEMS Oscillator – 24.0004 MHz, CMOS

MPNDSC1001DI2-024.0004T
Active

Microchip DSC1001DI2-024.0004T, XO (Standard) 24.0004 MHz, CMOS output, ±25 ppm stability, 1.8V~3.3V supply, -40°C~85°C, AEC-Q100, 4-SMD package.

Microchip Technology DSC1001DI2-024.0004T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DI2-024.0004T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency24.0004 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1001DI2-024.0004T is a MEMS-based XO (Standard) oscillator delivering a 24.0004 MHz CMOS output from a 1.8V to 3.3V supply rail.

Standby function and supply current profile

This makes the oscillator suitable for battery-backed RTC modules or sleep-mode clock hold in body controllers where the ECU stays powered during ignition-off periods.

Package, footprint, and mounting

Housed in a 4-SMD, no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The 0.098" x 0.079" footprint is a common MEMS oscillator land pattern — it drops onto the same pads as many quartz XO packages, so a board designed for a standard 2.5 x 2.0 mm crystal oscillator can accept this part without a layout change.

Frequently asked questions

Can DSC1001DI2-024.0004T replace a standard quartz crystal oscillator?

Yes, in most cases. The DSC1001DI2-024.0004T is a MEMS-based XO (Standard) with CMOS output — it directly replaces a quartz oscillator of the same frequency, package (2.5 x 2.0 mm 4-SMD), and output type. The MEMS resonator is more shock-tolerant and does not require external load capacitors. The supply voltage range (1.8V to 3.3V) covers common logic rails. Confirm the output drive strength matches the downstream load; the datasheet's CMOS output is compatible with most digital inputs.

Is DSC1001DI2-024.0004T compatible with a 1.8V supply?

Yes. The supply voltage range is 1.8V to 3.3V, so it operates directly on a 1.8V rail without an external regulator. The CMOS output voltage swings rail-to-rail, which is compatible with 1.8V logic inputs.

What is the frequency stability of DSC1001DI2-024.0004T?

The frequency stability is ±25 ppm across the full operating temperature range and supply voltage variation. This is a tight stability specification — it keeps the clock edge jitter low enough for CAN, USB full-speed, and most serial interfaces without external clock recovery.