Microchip Technology DSC1001DI2-024.0000, DSC1001 series, XO (Standard) MEMS oscillator, 24 MHz CMOS output, ±25 ppm stability, 1.8V–3.3V supply, AEC-Q100 qualified, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 24 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
A standby (power-down) function on pin 1 drops the supply current to 15 µA max, while the active draw is 6.3 mA max at 24 MHz — the standby current is low enough for battery-backed modules that need to preserve the clock state during sleep.
The 4-SMD, no-lead package (2.50 mm x 2.00 mm footprint, 0.90 mm seated height) is a standard MEMS oscillator land pattern — no unusual board layout or via-in-pad requirements.
Design engineers need to confirm signal compatibility with downstream logic.
Ensures the oscillator works with the target power rail (1.8V to 3.3V).
Sourcing buyers need immediate distribution channel and stock availability.
AEC-Q100 rating confirms suitability for automotive and harsh environments.
Price is a key decision factor for procurement and BOM cost estimation.
Cross-referencing helps find alternate sources or drop-in replacements.