Skip to main content
Log in
Microchip Technology DSC1001DI2-004.0960 — Crystals & Oscillators

DSC1001DI2-004.0960 – Microchip MEMS XO, 4.096 MHz, CMOS

MPNDSC1001DI2-004.0960
Active

Microchip Technology DSC1001DI2-004.0960, DSC1001 series MEMS XO (Standard), 4.096 MHz CMOS output, ±25 ppm stability, AEC-Q100 qualified, -40 to 85 °C, 4-SMD no-lead package.

$1.1600Ref. price · indicative, final on quote
Microchip Technology DSC1001DI2-004.0960 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DI2-004.0960 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency4.096 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

Rated AEC-Q100, this oscillator passes the automotive-grade stress suite: temperature cycling, ESD, and extended life tests. That qualification is the main differentiator from a standard quartz oscillator — the MEMS die and plastic package are built to survive under-hood thermal shock and vibration without the failure modes (activity dips, spurs) that quartz can exhibit in harsh environments. For a non-automotive BOM, a quartz XO may be cheaper; for an AEC-Q100 bill, the DSC1001DI2-004.0960 is the correct entry.

The supply voltage range is 1.8 V to 3.3 V, so the same part works across 1.8 V MCU banks and 3.3 V peripheral rails without a level shifter.

Frequently asked questions

Is the DSC1001DI2-004.0960 AEC-Q100 qualified?

Yes — the ratings field explicitly lists AEC-Q100. That means it is qualified for automotive applications, including the -40 to 85 °C temperature range and the reliability stress tests required for under-hood and cabin electronics.

Can the DSC1001DI2-004.0960 replace a standard quartz oscillator?

Functionally yes — both output a 4.096 MHz CMOS clock with ±25 ppm stability. The difference is the MEMS resonator and AEC-Q100 qualification. For a non-automotive board, a quartz XO may be a lower-cost alternative; for an automotive-grade BOM, the DSC1001DI2-004.0960 is the correct part. No pin-compatible quartz equivalent is listed as a direct second source.