Microchip DSC1001DI2-003.6864T, XO (Standard) MEMS oscillator, 3.6864 MHz, CMOS output, ±25 ppm stability, 1.8V–3.3V supply, -40°C to 85°C, AEC-Q100 qualified, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 3.6864 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The MEMS resonator gives it better shock and vibration tolerance than a quartz crystal oscillator, and the 4-SMD no-lead package with 2.50mm x 2.00mm footprint fits tight board layouts common in automotive modules.
The 1.8V to 3.3V supply range lets the oscillator run directly from the same rail as a 1.8V or 3.3V MCU or SoC without an external level translator — the CMOS output swings rail-to-rail.
The standby function disables the output and reduces supply current to 15 µA max. When the standby pin is asserted, the oscillator stops and the output goes to high-impedance, allowing the system to enter a low-power sleep mode.