Microchip DSC1001 series MEMS XO, 75 MHz, CMOS output, ±50 ppm stability, 4-SMD no-lead 2.5x2.0 mm package, AEC-Q100 qualified, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 75 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The MEMS resonator eliminates quartz aging and shock sensitivity — the 2.50 mm x 2.00 mm 4-SMD no-lead package survives the vibration profile of an engine-bay ECU without frequency drift.
Active current draw is 8.7 mA max at 75 MHz, keeping the thermal load low in the compact 0.90 mm seated-height package.
Listed as Active product status.
Yes. The supply voltage range is 1.8V to 3.3V, so it runs directly on a 3.3V rail without any external regulator or level shifter.
Yes.
CMOS output — it drives standard digital logic inputs directly without external termination or bias resistors.