Microchip Technology DSC1001 series MEMS XO, 33.333 MHz, CMOS output, ±50 ppm stability, 1.8–3.3 V supply, AEC-Q100, -40 to +85 °C, 4-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 33.333 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
That lets the ECU keep the oscillator powered but quiescent during sleep, waking on a GPIO edge without a full power cycle.
Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The 0.098" x 0.079" footprint matches industry-standard 2.5 x 2.0 mm MEMS oscillator land patterns — no special via-in-pad or thermal relief required. The TR format suits automated pick-and-place for production volumes; CT works for prototype builds and small-batch rework.
It outputs a standard CMOS logic level. The 33.333 MHz square wave is compatible with most MCU clock inputs, CAN controllers, and Ethernet PHY reference clocks that expect a 3.3 V or 1.8 V CMOS signal.
Yes, it carries an AEC-Q100 rating. That means it has passed the automotive qualification suite: pre- and post-stress electrical tests, temperature cycling, ESD, and latch-up. It is suitable for automotive applications up to 85 °C ambient.
Yes, it has a Standby (Power Down) function. When asserted, the output is disabled and the supply current drops to 15 µA max, preserving battery or system sleep current.