Skip to main content
Log in
Microchip Technology DSC1001DI1-025.0008 — Crystals & Oscillators

DSC1001DI1-025.0008 MEMS XO, 25.0008 MHz, CMOS, AEC-Q100

MPNDSC1001DI1-025.0008
Active

Microchip Technology DSC1001DI1-025.0008, XO (Standard) MEMS oscillator, 25.0008 MHz, CMOS output, ±50 ppm stability, AEC-Q100 qualified, -40°C to 85°C, 4-SMD no-lead package, active production.

Microchip Technology DSC1001DI1-025.0008 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DI1-025.0008 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency25.0008 MHz
Frequency stability±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

AEC-Q100 qualified MEMS XO at 25.0008 MHz

The DSC1001DI1-025.0008: It carries AEC-Q100 qualification — this is not a commercial part dressed up for automotive; the qualification grade is on the datasheet and supports PPAP submission for under-hood or cabin electronic modules.

Supply voltage flexibility and power-down function

The oscillator accepts a wide supply range of 1.8V to 3.3V, allowing it to operate from common 1.8V, 2.5V, or 3.3V rails without an external regulator. Maximum active supply current is 6.3 mA, keeping the thermal budget low in the 4-SMD, no-lead package measuring 2.50 mm x 2.00 mm.

Frequently asked questions

What is the output type of DSC1001DI1-025.0008?

The DSC1001DI1-025.0008 outputs a standard CMOS signal at 25.0008 MHz. This is a single-ended, rail-to-rail swing compatible with most MCU and SoC clock inputs.

Is DSC1001DI1-025.0008 AEC-Q100 qualified?

Yes, the DSC1001DI1-025.0008 carries AEC-Q100 ratings, making it suitable for automotive applications where PPAP documentation and temperature-grade qualification are required.