Skip to main content
Log in
Microchip Technology DSC1001DI1-001.8432 — Crystals & Oscillators

DSC1001DI1-001.8432 MEMS XO 1.8432 MHz CMOS AEC-Q100 Active

MPNDSC1001DI1-001.8432
Active

Microchip Technology DSC1001DI1-001.8432, MEMS-based XO (Standard), 1.8432 MHz CMOS output, ±50 ppm stability, -40°C to 85°C, AEC-Q100 qualified, 4-SMD no-lead package.

$1.2000Ref. price · indicative, final on quote
Microchip Technology DSC1001DI1-001.8432 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DI1-001.8432 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency1.8432 MHz
Frequency stability±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

MEMS oscillator at 1.8432 MHz — CMOS output, AEC-Q100

The DSC1001DI1-001.8432 is a MEMS-based standard XO from Microchip's DSC1001 series, delivering a fixed 1.8432 MHz CMOS output. Its base resonator is MEMS rather than quartz — this means faster startup, better shock resistance, and no crystal aging drift over the product lifetime. AEC-Q100 qualification confirms the part meets automotive-grade reliability stress and PPAP requirements — it can be placed in under-hood or cabin electronics where vibration and temperature extremes are the norm.

Supply range and power-down standby

Operates from a single 1.8V to 3.3V supply, covering the common logic rails without an extra regulator. The maximum supply current is 6.3 mA — low enough for battery-backed real-time clocks and always-on peripherals. A standby (power-down) function drops the disable current to 15 µA max. This lets the system gate the oscillator during sleep modes, preserving battery life in portable or automotive body controllers that spend most of their time in low-power state.

4-SMD no-lead package — board-fit note

Housed in a 4-SMD, no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The small footprint and low profile suit space-constrained PCBs in automotive ECUs, IoT modules, and portable instruments. Surface-mount mounting — standard reflow profile; no special handling beyond normal MSL precautions for a plastic-encapsulated MEMS device.

Active lifecycle — no end-of-life risk

Sourced through independent distribution; quoted to order against the BOM quantity.

Frequently asked questions

Can DSC1001DI1-001.8432 replace a standard quartz crystal oscillator?

Yes — it is a drop-in replacement for a quartz XO in the same 4-SMD footprint, with the same CMOS output and supply voltage range. The MEMS resonator offers faster startup and better shock/vibration tolerance than quartz, but the electrical interface is identical.

Does DSC1001DI1-001.8432 have AEC-Q100 qualification for automotive use?

Yes — it is rated AEC-Q100, meaning it meets automotive-grade qualification including temperature cycling, ESD, and reliability stress testing. Suitable for under-hood and cabin electronics.

Does DSC1001DI1-001.8432 have a standby function?

Yes — it includes a Standby (Power Down) function. When disabled, the supply current drops to 15 µA max, enabling power gating in sleep-sensitive designs.