Skip to main content
Log in
Microchip Technology DSC1001DE1-024.0000T — Crystals & Oscillators

DSC1001DE1-024.0000T MEMS Oscillator 24 MHz CMOS AEC-Q100

MPNDSC1001DE1-024.0000T
Active

Microchip DSC1001DE1-024.0000T, XO (Standard), 24 MHz CMOS output, MEMS resonator, AEC-Q100, 1.8V~3.3V supply, -20°C~70°C, 4-SMD no-lead package.

$0.8700Ref. price · indicative, final on quote
Microchip Technology DSC1001DE1-024.0000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DE1-024.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency24 MHz
Frequency stability±50ppm
Operating temperature-20°C~70°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

It outputs CMOS levels and carries AEC-Q100 qualification, making it suitable for automotive timing applications where shock and vibration tolerance matter more than a quartz oscillator's aging curve. Supply voltage spans 1.8V to 3.3V, so the same part serves 1.8V, 2.5V, and 3.3V logic rails without a separate LDO.

Temperature grade and automotive fit

This covers cabin and most under-hood locations, but not the full -40°C cold-crank requirement some ECUs specify. If your BOM calls for -40°C operation, check the DSC1001 family's extended-temperature variants.

Housed in a 4-SMD, no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The 0.098" x 0.079" footprint matches standard 2.5 x 2.0 mm oscillator pads — no via-in-pad or special fan-out needed. Surface-mount mounting only.

Product status is Active per Microchip.

Frequently asked questions

Can the DSC1001DE1-024.0000T replace a standard quartz oscillator?

Yes, in most applications. The MEMS resonator offers better shock and vibration tolerance than quartz, and the CMOS output is directly compatible. However, verify the frequency stability (±50 ppm) and operating temperature range (-20°C to 70°C) against your system's timing budget — quartz oscillators often offer tighter stability and wider temperature options.

Is the DSC1001DE1-024.0000T compatible with 3.3V logic?

Yes. The supply voltage range is 1.8V to 3.3V, so it runs directly on a 3.3V rail. The CMOS output swings rail-to-rail, which is compatible with 3.3V MCU and SoC inputs.