Microchip DSC1001 series MEMS-based XO (Standard), 19.2 MHz, CMOS output, 1.8V–3.3V supply, AEC-Q100 qualified, standby (power down) function, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 19.2 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001DE1-019.2000T is a 19.2 MHz MEMS-based oscillator from Microchip's DSC1001 series, delivering a CMOS output over a 1.8V to 3.3V supply range.
This makes the part suitable for intermittently powered modules that must wake from a low-power state without a separate enable signal.
Asserting the standby pin places the oscillator into a power-down state, drawing 15 µA max. The output is disabled, and the MEMS resonator stops oscillating. De-asserting the pin restarts the output within the start-up time specified in the datasheet.