The DSC1001DC5-022.5792 is a MEMS-based XO (Standard) from Microchip Technology, delivering a 22.5792 MHz CMOS output with ±10 ppm frequency stability. Its AEC-Q100 qualification means it meets automotive reliability stress and temperature requirements — suitable for under-hood or cabin-domain ECUs where quartz oscillators might drift under vibration or thermal shock.
Standby power-down and wide supply range
The supply voltage spans 1.8 V to 3.3 V, so the same part works across a 3.3 V peripheral bus or a 1.8 V core rail without a level translator on the clock line. Active current draw is 6.3 mA max at the rated frequency — low enough that the thermal rise in the 2.5 mm × 2.0 mm 4-SMD package stays negligible in still air.
Commercial temperature range and package fit
It fits indoor electronics, office equipment, consumer audio/video gear, and telecom line cards where the enclosure temperature stays below 70°C. The 4-SMD, No Lead package (2.50 mm × 2.00 mm footprint, 0.90 mm seated height) is a standard MEMS oscillator land pattern. No via-in-pad required; the small footprint frees board area for other routing.
Active lifecycle and sourcing through independent distribution
No stock-holding claim — we source per your quantity and delivery need.