Active production — automotive-grade MEMS clock source
Supply voltage spans 1.8V to 3.3V, so it runs directly off a 3.3V or 1.8V rail without an external LDO.
This is the feature to use when the system enters a low-power sleep mode — the oscillator wakes on a logic-level enable signal, no external gating needed.
Housed in a 4-SMD, no-lead package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm. For a 32 MHz clock, that translates to a maximum frequency error of ±1.6 kHz — tight enough for USB full-speed and CAN bus timing without external trimming.