Microchip DSC1001CL1-030.0000T, XO (Standard) MEMS oscillator, 30 MHz CMOS output, ±50 ppm stability, AEC-Q100 qualified, -40°C to 105°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 30 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
AEC-Q100 qualification means this oscillator meets automotive reliability stress tests — suitable for under-hood or cabin-domain ECUs where quartz crystals risk micro-cracking under shock or thermal cycling.
Operating from 1.8V to 3.3V, the oscillator spans common logic rails without a separate level translator — a single BOM line covers 1.8V MCU and 3.3V FPGA clock inputs.
No direct pin-compatible alternative is listed on the evidence. The DSC1001 series shares the same 4-SMD no-lead footprint across frequencies, so a different frequency variant (e.g., DSC1001CL1-025.0000T) would be mechanically compatible but not a functional replacement without a clock-tree change.