Skip to main content
Log in
Microchip Technology DSC1001CL1-030.0000 — Crystals & Oscillators

DSC1001CL1-030.0000 MEMS Oscillator 30 MHz AEC-Q100

MPNDSC1001CL1-030.0000
Active

Microchip DSC1001CL1-030.0000, XO (Standard) MEMS oscillator, 30 MHz CMOS output, AEC-Q100 rated, -40°C to 105°C, 1.8V–3.3V supply, 4-SMD no-lead package.

$1.2750Ref. price · indicative, final on quote
Microchip Technology DSC1001CL1-030.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001CL1-030.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply7.2mA
Current - supply (Disable)15µA
Frequency30 MHz
Frequency stability±50ppm
Operating temperature-40°C~105°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1001CL1-030.0000 is an AEC-Q100 qualified MEMS-based XO delivering a 30 MHz CMOS clock from a single 1.8V to 3.3V supply rail.

Supply flexibility and power-down standby

Maximum active current is 7.2 mA, keeping the thermal contribution to the local board zone low in dense layouts.

Package and footprint for automated assembly

Housed in a 4-SMD no-lead package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm, the footprint matches industry-standard 3.2x2.5 mm oscillator pads. Surface-mount construction suits reflow soldering; the no-lead package eliminates coplanarity concerns and supports automated optical inspection.

Frequently asked questions

Where can I order DSC1001CL1-030.0000 and what is the lead time?

The package is a tube of 4-SMD no-lead parts.

Is DSC1001CL1-030.0000 suitable for automotive applications?

Yes — it is AEC-Q100 rated, which means it has passed the automotive IC qualification stresses (temperature cycling, ESD, latch-up) and is supported with PPAP documentation.

Can DSC1001CL1-030.0000 replace a standard quartz crystal oscillator?

Functionally yes — it provides a CMOS clock output at 30 MHz with a frequency stability of ±50 ppm, similar to a quartz XO. The MEMS construction gives better shock and vibration resistance, but the board must accept a 3.2x2.5 mm 4-pin no-lead footprint. Confirm the pinout matches your existing crystal oscillator before substitution.

Is DSC1001CL1 compatible with a 1.8V supply?

Yes — the supply voltage range is 1.8V to 3.3V, so it works directly on a 1.8V rail without an additional regulator.