Microchip DSC1001CI5-033.3333, MEMS-based XO (Standard), 33.3333 MHz CMOS output, ±10 ppm stability, 1.8V–3.3V supply, -40°C to 85°C, 4-SMD package, AEC-Q100 rated.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 33.3333 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The 4-SMD, no-lead package (3.20 mm x 2.50 mm footprint, 0.90 mm seated height) fits standard oscillator land patterns, making it a drop-in replacement for quartz-based XOs in many designs.
Operates from a 1.8V to 3.3V supply rail, covering the common logic voltages without a separate regulator — the same BOM line can serve 1.8V or 3.3V domains.
Yes — the 4-SMD, no-lead package (3.20 mm x 2.50 mm) matches the common quartz XO footprint. The MEMS resonator is more shock- and vibration-tolerant than quartz, and the ±10 ppm stability is equivalent to a typical quartz oscillator. No external load capacitors are needed; the output is a full-rail CMOS signal.
No — as a MEMS oscillator with CMOS output, the frequency is set internally. There is no load-capacitance spec to match; the output drives a standard CMOS load directly.
15 µA max when the standby (power-down) function is asserted. This lets the oscillator hold its state while the rest of the system sleeps, drawing negligible current.