10.0013 MHz MEMS oscillator for automotive and industrial timing
The DSC1001CI5-010.0013: AEC-Q100 qualification means this part is validated for automotive stress conditions — under-hood or cabin electronics where vibration and thermal cycling are the norm. The MEMS resonator replaces a quartz crystal, giving better shock and vibration resistance and a faster start-up time compared to a traditional crystal oscillator.
Supply voltage flexibility and standby power-down
The supply voltage range spans 1.8V to 3.3V, so the same oscillator works across 1.8V, 2.5V, and 3.3V logic rails without a level translator. A standby (power-down) function drops the supply current to 15 µA max — useful for battery-powered systems that need to gate the clock during sleep modes. Active current draw is 6.3 mA max at the operating frequency, which is typical for a MEMS oscillator at this speed.
Package, footprint, and board layout fit
The 4-SMD, no-lead package measures 3.20 mm x 2.50 mm with a seated height of 0.90 mm — a standard 3.2 x 2.5 mm oscillator footprint that matches many quartz oscillator pads. Surface-mount assembly with no exposed leads simplifies reflow soldering and reduces parasitic inductance on the output trace.