Skip to main content
Log in
Microchip Technology DSC1001CI2-096.0000 — Crystals & Oscillators

DSC1001CI2-096.0000 MEMS XO – 96 MHz, AEC-Q100, CMOS, Active

MPNDSC1001CI2-096.0000
Active

Microchip Technology DSC1001CI2-096.0000, XO (Standard) MEMS oscillator, 96 MHz CMOS output, ±25 ppm stability, 1.8V–3.3V supply, 4-SMD no-lead package, AEC-Q100 qualified, -40°C to 85°C.

$1.3500Ref. price · indicative, final on quote
Microchip Technology DSC1001CI2-096.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001CI2-096.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply8.7mA
Current - supply (Disable)15µA
Frequency96 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

Microchip DSC1001CI2-096.0000 is an XO (Standard) MEMS-based oscillator delivering a 96 MHz CMOS output.

Runs from 1.8V to 3.3V — covers 2.5V and 3.3V logic rails without a separate regulator.

4-SMD no-lead package, 3.20 mm x 2.50 mm body, 0.90 mm seated height. Standard 4-pin layout — no via-in-pad needed. The 0.126" x 0.098" footprint matches many 3225-sized quartz oscillators, simplifying a drop-in swap on existing layouts.

Active product status — no NRND or EOL notice. Availability confirmed at RFQ.

Frequently asked questions

Is DSC1001CI2-096.0000 compatible with a 3.3V supply?

Yes. The supply voltage range is 1.8V to 3.3V, so a 3.3V rail is within spec. No external level shifter needed.

Can DSC1001CI2-096.0000 replace a quartz oscillator?

In most cases yes, if the existing quartz oscillator is a 3.2 mm x 2.5 mm 4-pin SMD with CMOS output and runs on 1.8V–3.3V. The MEMS construction is more shock-resistant and has a faster start-up than quartz. Confirm the pinout matches — the DSC1001 uses a standard 4-pin no-lead layout.