83.25 MHz MEMS oscillator with AEC-Q100 grade
AEC-Q100 qualification means this part has passed automotive-grade reliability testing — it is suited for under-hood and chassis-mounted electronics where temperature cycling and vibration are a concern. The supply voltage spans 1.8V to 3.3V, so the same oscillator can feed a 1.8V FPGA bank or a 3.3V MCU without a level translator.
Standby function and current draw
A standby (power-down) pin drops the supply current to 15 µA max — useful for battery-backed systems that need to gate the clock during sleep modes. Active-mode current is 8.7 mA max, which is typical for a MEMS oscillator at this frequency and keeps the thermal load low in a 4-SMD package.
Package and board-fit notes
The 4-SMD, no-lead package measures 3.20 mm x 2.50 mm with a seated height of 0.90 mm — a standard 3.2 x 2.5 mm footprint that matches many quartz oscillators, so the PCB layout is a drop-in swap. Supplied on tape and reel for automated pick-and-place; no special reflow profile beyond standard lead-free solder is required for this MEMS resonator.