Microchip DSC1001CI2-066.6666T, XO (Standard) MEMS oscillator, 66.6666 MHz CMOS output, ±25 ppm stability, AEC-Q100 qualified, -40°C~85°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 66.6666 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
It runs from a 1.8V to 3.3V supply rail and draws a maximum of 7.2 mA when active; the standby (power-down) function drops consumption to 15 µA, making it a fit for battery-backed or always-on automotive modules that sleep between wake events.
Housed in a 4-SMD, no-lead package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm — a compact footprint that matches standard quartz oscillator land patterns.
We source the DSC1001CI2-066.6666T through independent distribution channels. Submit an RFQ with your target quantity; we confirm availability and current pricing at quote time. No stock-holding claim — each order is quoted to order.
The DSC1001CI2 uses a MEMS resonator instead of quartz, but the electrical interface is the same: CMOS output, standard supply voltage range, and the same 4-SMD footprint. No board spin is needed if the original quartz oscillator was a 4-pin CMOS device at the same frequency and stability grade.