AEC-Q100 qualification — where it fits in the vehicle
If your BOM requires a 27.6 MHz clock for a CAN transceiver, Ethernet PHY, or MCU, this part carries the automotive PPAP traceability.
Frequency stability and power — sizing the clock tree
That is tight enough for most CAN and 100BASE-T1 applications without a separate TCXO. When the standby (power-down) function is asserted, the oscillator draws a maximum of 15 µA. This is useful for modules that need to wake on a bus event — the oscillator stays off until the enable pin is driven high, saving battery current in ignition-off states.
Package and footprint — 4-SMD, no lead
The 4-SMD, no-lead package measures 3.20 mm x 2.50 mm with a seated height of 0.90 mm. It is a standard 4-pad land pattern — no thermal pad, no via-in-pad. The 0.126" x 0.098" footprint matches common 3.2 x 2.5 mm oscillator footprints, so a layout designed for a quartz oscillator in the same package size accepts this MEMS part without a board spin.
Product status is Active.