Skip to main content
Log in
Microchip Technology DSC1001CI2-013.0000 — Crystals & Oscillators

DSC1001CI2-013.0000 MEMS XO – 13 MHz, AEC-Q100, Active

MPNDSC1001CI2-013.0000
Active

Microchip DSC1001CI2-013.0000, MEMS-based XO (Standard), 13 MHz CMOS output, ±25 ppm stability, AEC-Q100 qualified, 1.8-3.3 V supply, -40°C to 85°C, 4-SMD no-lead package.

Microchip Technology DSC1001CI2-013.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001CI2-013.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency13 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

Standby power-down and current draw

Package and footprint for automotive PCB layout

Housed in a 4-SMD, no-lead package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm — the same footprint as standard 3.2 x 2.5 mm quartz oscillators, so it drops onto existing PCB layouts without a board spin.

No last-time-buy window or successor part number has been issued. For a BOM line sourcing this part, the active status means no urgent requalification risk. Availability is confirmed per RFQ through independent distribution channels.

Frequently asked questions

What is the frequency stability of DSC1001CI2-013.0000?

This is the total stability including initial tolerance, temperature drift, and supply-voltage variation — tight enough for CAN, LIN, and Ethernet clocking in automotive systems.

Is DSC1001CI2-013.0000 a direct replacement for a standard 13 MHz quartz crystal oscillator?

Yes, in most cases. The DSC1001CI2-013.0000 is pin-compatible with standard 3.2 x 2.5 mm 4-pad quartz oscillators. The MEMS resonator inside is more resistant to shock and vibration, but the output is the same CMOS logic level. Confirm that your board's supply voltage falls within the 1.8 V to 3.3 V range and that the enable/power-down pin logic matches your design.

Does DSC1001CI2-013.0000 have a standby power-down mode?

Yes. The standby (power-down) function disables the oscillator and reduces supply current to 15 µA max. The output goes high-impedance, allowing other oscillators on the same bus line to drive the clock without contention. This is useful for battery-backed modules that need to conserve power during sleep.

Is DSC1001CI2-013.0000 AEC-Q100 qualified?

Yes, it carries an AEC-Q100 rating, meaning it has passed automotive-grade stress tests including temperature cycling, ESD, and latch-up. This qualifies it for use in under-hood and cabin electronics where reliability requirements exceed commercial or industrial grades.