Microchip Technology DSC1001 series, XO (Standard), 8.192 MHz, CMOS output, ±25 ppm frequency stability, 1.8V ~ 3.3V supply, AEC-Q100 qualified, -40°C ~ 85°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 8.192 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Supply voltage spans 1.8V to 3.3V, allowing a single oscillator to feed both a 1.8V MCU core and a 3.3V peripheral bus without a level translator.
The 4-SMD no-lead package measures 3.20 mm x 2.50 mm with a seated height of 0.90 mm, fitting standard 3.2 x 2.5 mm oscillator footprints. Surface-mount reflow follows standard lead-free profiles; no special bake-out is required for this MEMS device.
Yes — it is a MEMS-based XO with CMOS output and a standard 3.2 x 2.5 mm footprint. It drops directly into a quartz oscillator socket with the same supply voltage range (1.8V–3.3V) and provides ±25 ppm stability. The MEMS die is inherently more shock- and vibration-tolerant than a quartz crystal, which is an advantage in automotive and industrial environments.
Yes — it carries an AEC-Q100 rating, meaning it has passed automotive-grade reliability testing including temperature cycling, ESD, and latch-up. It is suitable for under-hood and cabin electronics where standard commercial oscillators would not be qualified.
Yes — the function is listed as Standby (Power Down). When disabled, the supply current drops to 15 µA max, allowing the oscillator to be gated off in sleep mode without a separate load switch.