6 MHz MEMS oscillator with AEC-Q100 grade
AEC-Q100 qualification means this part passed the temperature cycling, ESD, and reliability stress tests required for automotive ECU, sensor, and infotainment modules — the under-hood ambient profile is covered. Supply voltage spans 1.8V to 3.3V, so it can run directly off a 1.8V MCU rail or a 3.3V CAN transceiver supply without a level translator on the clock line.
Active production — quoted to order
The part is available for new designs and volume production through independent distribution; quoted against your BOM quantity at RFQ. The MEMS resonator replaces a quartz crystal — no crystal aging drift, no start-up reliability concern over temperature. Standby (Power Down) function drops supply current to 15 µA max, useful for battery-backed modules that need to gate the clock when the system sleeps.
Package and footprint — 4-SMD no-lead
Housed in a 4-SMD, No Lead package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm. The 0.50 mm pitch pads are compatible with standard reflow profiles; no via-in-pad required. Maximum supply current is 6.3 mA — the MEMS die draws less than a comparable quartz oscillator, which matters for thermally constrained automotive modules where every milliamp adds to the junction temperature budget.