Microchip DSC1001CE5-008.0000, XO (Standard) MEMS oscillator, 8 MHz CMOS output, ±10ppm stability, 1.8V–3.3V supply, AEC-Q100 qualified, 4-VDFN package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 8mA |
| Current - supply (Disable) | 15µA |
| Frequency | 8 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-VDFN |
It operates from a 1.8V to 3.3V supply, drawing a maximum of 8 mA from the rail. For a 12V battery-fed infotainment system, the 1.8V–3.3V input range lets it run directly off a 3.3V or 1.8V rail without an extra LDO.
Housed in a 4-VDFN package measuring 3.20mm x 2.50mm with a seated height of 0.90mm. No exposed pad — the four terminals are on the package periphery, so fan-out is straightforward on a two-layer board.
8 MHz.
Yes, it carries AEC-Q100 qualification.