Microchip Technology DSC1001CE1-012.8860, MEMS-based XO (Standard), 12.886 MHz CMOS output, ±50 ppm stability, AEC-Q100 qualified, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 12.886 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001CE1-012.8860 is a MEMS-based XO (Standard) from Microchip's DSC1001 series, delivering a 12.886 MHz CMOS output with ±50 ppm frequency stability.
Housed in a 4-SMD, no-lead package measuring 3.20 mm x 2.50 mm x 0.90 mm, it fits the same footprint as many quartz oscillators, easing a drop-in swap on existing PCB layouts.
Yes, in most cases. The MEMS-based DSC1001CE1-012.8860 is pin-compatible with standard 4-pad quartz oscillators in the same 3.2 mm x 2.5 mm footprint. The MEMS resonator offers better shock resistance and faster start-up than quartz, but the output is still CMOS, so the downstream logic sees the same signal.
±50 ppm over the full -20°C to 70°C range. That is tight enough for most MCU clocking, CAN, and Ethernet PHY references, but not for precision RF or GPS timing where ±10 ppm or better is needed.
Yes, it carries AEC-Q100 automotive qualification and is RoHS compliant per Microchip's standard material declaration.