The DSC1001CC1-076.0686T is a Microchip DSC1001 series MEMS-based XO (standard oscillator) that outputs a 76.0686 MHz CMOS clock from a 4-SMD, no-lead package. At 8.7 mA max supply current, this oscillator draws less than a typical crystal + load-cap pair, saving a few milliamps on the power budget.
DSC1001CC1-076.0686T Microchip MEMS XO, 76.0686 MHz, CMOS
MPNDSC1001CC1-076.0686T
Active
Microchip DSC1001 series MEMS XO, 76.0686 MHz, CMOS output, ±50 ppm stability, 1.8V–3.3V supply, 4-SMD package, AEC-Q100 qualified, 0°C to 70°C operating range.
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 76.0686 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | 0°C ~ 70°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Product details
Frequently asked questions
Is DSC1001CC1-076.0686T a direct replacement for the Epson SG-210STF 76.0686 MHz?
Both are 76.0686 MHz CMOS oscillators in a 3.2 mm x 2.5 mm 4-SMD package, but the Epson SG-210STF uses a quartz crystal resonator while the DSC1001 uses a MEMS resonator. The pinout and footprint are the same, so it is a drop-in swap on the PCB. Confirm the supply voltage range (1.8V–3.3V for the DSC1001) and the frequency stability (±50 ppm) match your design — the Epson part may have different stability grades.
Does DSC1001CC1-076.0686T have a datasheet with pinout?
Yes, the full datasheet for the DSC1001 series is available from Microchip. It includes the pinout for the 4-SMD, no-lead package, the standby function timing, and the frequency stability vs. temperature curves. The base product number is DSC1001.
Is DSC1001CC1-076.0686T RoHS compliant?
The DSC1001 series is manufactured as RoHS-compliant and lead-free. The part is supplied on tape and reel (TR). Confirm the specific compliance certificate with the datasheet or your Microchip sales contact.