Skip to main content
Log in
Microchip Technology DSC1001CC1-026.0000 — Crystals & Oscillators

DSC1001CC1-026.0000 MEMS XO – 26 MHz, AEC-Q100, Standby

MPNDSC1001CC1-026.0000
Active

Microchip Technology DSC1001CC1-026.0000, XO (Standard) MEMS oscillator, 26 MHz, CMOS output, ±50 ppm stability, AEC-Q100 qualified, standby (power down) function, 1.8V–3.3V supply, 4-SMD no-lead package.

Microchip Technology DSC1001CC1-026.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001CC1-026.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency26 MHz
Frequency stability±50ppm
Operating temperature0°C~70°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The supply voltage range spans 1.8V to 3.3V, allowing a single BOM line to serve multiple voltage domains without a level translator, and the maximum supply current is 6.3 mA.

Standby (power down) function and disable current

This 15 µA disable current is low enough that a battery-backed real-time clock domain or a microcontroller in deep sleep can leave the oscillator powered but disabled, preserving the wake-up timing accuracy without draining the energy budget.

Package, mounting, and board integration

Housed in a 4-SMD, no-lead package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm, the DSC1001CC1-026.0000 is a surface-mount device that fits standard pick-and-place assembly and reflow profiles.

Frequently asked questions

Does the DSC1001CC1-026.0000 meet automotive (AEC-Q100) requirements?

Yes, the DSC1001CC1-026.0000 is rated AEC-Q100, qualifying it for automotive-grade applications including under-hood and chassis-domain electronics where temperature and vibration tolerance are required.

What is the standby (power down) function on the DSC1001CC1-026.0000?

The standby function disables the oscillator output and reduces the supply current to a maximum of 15 µA, allowing the system to gate the clock in low-power sleep modes without an external load switch.