Microchip Technology DSC1001CC1-004.0960T, XO (Standard), CMOS output, 4.096 MHz, MEMS base, 1.8V–3.3V supply, AEC-Q100, 0°C–70°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 4.096 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | 0°C~70°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Its 1.8V to 3.3V supply range spans the three most common digital rails, so the same oscillator can serve a 1.8V FPGA bank or a 3.3V MCU without a level translator. Frequency stability is ±50 ppm, adequate for UART baud-rate generation and general-purpose clocking where a crystal's tighter tolerance is not required.
The 4-SMD, no-lead package (3.20mm x 2.50mm) is a standard footprint shared across the DSC1001 family.
Both share the same base product number DSC1001 and the same 4.096 MHz frequency, but the suffix difference (CC1 vs CL1) may indicate variations in stability, temperature range, or packaging. Verify the specific datasheet parameters for your application before substitution.