Microchip DSC1001BL5-100.0000 XO (Standard) MEMS oscillator, 100 MHz CMOS output, ±10 ppm frequency stability, AEC-Q100 qualified, -40°C to 105°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 100 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001BL5-100.0000 is a 100 MHz XO (Standard) oscillator built on a MEMS resonator, delivering CMOS output in a 4-SMD no-lead package measuring 5.00 mm × 3.20 mm.
Frequency stability is ±10 ppm, tight enough for 100BASE-TX Ethernet clocking or CAN bus timing where edge jitter must stay within a narrow window.
The oscillator operates from 1.8 V to 3.3 V, covering the common digital supply rails used in automotive and industrial systems.
Yes, it carries AEC-Q100 ratings, making it suitable for automotive applications where the qualification is required.
Frequency stability is ±10 ppm, which is adequate for most serial communication clocks and microcontroller references.
When the enable pin is driven low, the oscillator enters standby and draws 15 µA max. The output is disabled, allowing the system to cut clock power without an external MOSFET.
The MEMS-based DSC1001BL5-100.0000 is pin-compatible with many standard 4-pad quartz oscillators in the same 5.0 mm × 3.2 mm footprint, but confirm the supply voltage range and enable polarity against your existing quartz part before substituting.