Skip to main content
Log in
Microchip Technology DSC1001BL5-010.0000 — Crystals & Oscillators

DSC1001BL5-010.0000 MEMS XO 10 MHz AEC-Q100 - Microchip

MPNDSC1001BL5-010.0000
Active

Microchip DSC1001BL5-010.0000, MEMS-based XO (Standard), 10 MHz CMOS output, ±10 ppm stability, 1.8V–3.3V supply, AEC-Q100 qualified, -40°C to 105°C, 4-SMD no-lead package.

$2.3800Ref. price · indicative, final on quote
Microchip Technology DSC1001BL5-010.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001BL5-010.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency10 MHz
Frequency stability±10ppm
Operating temperature-40°C~105°C
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

MEMS oscillator with AEC-Q100 for automotive timing

Supply voltage spans 1.8V to 3.3V, so the same part serves 1.8V, 2.5V, and 3.3V logic domains without a separate regulator or voltage divider.

Standby power-down and current draw

The disable pin is a standard feature on the DSC1001 series — pull it low to shut down the output and reduce system idle current.

Housed in a 4-SMD, no-lead package measuring 5.00 mm x 3.20 mm with a seated height of 0.90 mm — a common footprint shared with many quartz oscillators, easing drop-in replacement. The 0.90 mm height keeps it compatible with tight mezzanine stack-ups in automotive control modules.

Frequently asked questions

Does DSC1001BL5-010.0000 have a standby power-down mode?

Yes, the standby (power-down) function reduces current draw to 15 µA max, useful for battery-backed or intermittent operation.

Is DSC1001BL5-010.0000 a drop-in replacement for standard 10 MHz quartz oscillators?

The 4-SMD no-lead package and 5.00 mm x 3.20 mm footprint match many standard quartz oscillators. However, confirm the pinout and enable logic — the DSC1001 uses a standard disable function — against your existing quartz part's datasheet before committing.

What are the closest equivalents to DSC1001BL5-010.0000?

Within the DSC1001 series, other frequency and stability variants share the same package and supply range. For a pin-compatible alternative outside the series, look for other 4-SMD MEMS or quartz XOs with 1.8V–3.3V supply and CMOS output — but only the DSC1001 carries the AEC-Q100 rating on this footprint.