Microchip Technology DSC1001BI2-026.0000T, XO (Standard) 26 MHz CMOS MEMS oscillator, AEC-Q100, -40°C to 85°C, 1.8V to 3.3V supply, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 26 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001BI2-026.0000T is a 26 MHz MEMS-based XO (Standard) from Microchip's DSC1001 series, delivering a CMOS output in a 4-SMD no-lead package measuring 5.00 mm x 3.20 mm.
Operates from 1.8V to 3.3V, covering 1.8V logic, 2.5V, and 3.3V rails with a single BOM line — no need to qualify separate voltage variants.
The DSC1001 series is Microchip's standard MEMS oscillator family, so long-term availability is typical for a current catalog part.
Yes. The base resonator is MEMS, not quartz.
Yes, it carries AEC-Q100 rating. That means it has passed the automotive-grade qualification flow — temperature cycling, ESD, latch-up, and extended life tests — so it is approved for under-hood and cabin electronic modules.
When the enable pin is driven low, the oscillator stops and draws 15 µA max. The output goes high-impedance, letting you gate the clock to a sleeping processor without an external load switch.