Microchip DSC1001 series MEMS-based XO (Standard), 24 MHz CMOS output, ±25 ppm stability, 1.8V–3.3V supply, AEC-Q100 qualified, 4-SMD no-lead package
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 24 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001BI2-024.0000T is a 24 MHz MEMS-based XO (Standard) from Microchip's DSC1001 series, delivering a CMOS output with ±25 ppm frequency stability across -40°C to 85°C.
Housed in a 4-SMD, No Lead package measuring 5.00mm x 3.20mm with a seated height of 0.90mm — standard footprint matches common 5x3.2 mm oscillator pads. Check the MSL rating before the bake cycle — typical MEMS oscillators are MSL 1, but confirm on the reel label.
It outputs a 24 MHz clock signal.
Yes, it carries AEC-Q100 qualification, making it suitable for automotive applications.
The output is CMOS, compatible with standard digital logic inputs.
No — as a MEMS oscillator with a CMOS output, it does not need external load capacitors like a quartz crystal. The output drives a standard CMOS load directly.