Skip to main content
Log in
Microchip Technology DSC1001BI2-009.6000T — Crystals & Oscillators

DSC1001BI2-009.6000T 9.6 MHz MEMS Oscillator – Microchip

MPNDSC1001BI2-009.6000T
Active

Microchip Technology DSC1001BI2-009.6000T, XO (Standard) MEMS oscillator, 9.6 MHz CMOS output, ±25 ppm stability, 4-SMD no-lead package, AEC-Q100 qualified.

Microchip Technology DSC1001BI2-009.6000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001BI2-009.6000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency9.6 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

9.6 MHz MEMS oscillator with automotive qualification

Supply voltage and power-down standby

Operates from a 1.8V to 3.3V supply rail, so it can run directly from a 1.8V core supply or a 3.3V I/O rail without an extra regulator — the wide range covers both.

Housed in a 5.0 mm × 3.2 mm 4-SMD no-lead package with a seated height of 0.90 mm — the footprint matches industry-standard 5×3.2 mm oscillator pads, so a layout designed for a quartz oscillator of the same size accepts this MEMS part without a board spin.

Frequently asked questions

Can the DSC1001BI2-009.6000T replace a standard 9.6 MHz crystal oscillator?

Yes, in most cases. The DSC1001BI2-009.6000T is a MEMS-based XO with a CMOS output and a 5.0 mm × 3.2 mm footprint that matches common quartz oscillator pads. However, verify that your circuit expects a CMOS-level clock input (not a sine wave or clipped sine) and that the supply voltage (1.8V–3.3V,) is compatible. The MEMS resonator is more shock- and vibration-tolerant than a quartz crystal, which is an advantage in automotive and industrial environments.

Is the DSC1001BI2-009.6000T AEC-Q100 qualified?

Yes, the DSC1001BI2-009.6000T carries AEC-Q100 qualification, which means it has passed the automotive-grade reliability tests including temperature cycling, ESD, and latch-up. This qualifies it for use in under-hood and cabin electronics where standard commercial oscillators would not be accepted.

What is the output type and supply voltage range for the DSC1001BI2-009.6000T?

The output is CMOS, a standard digital clock signal compatible with most MCUs, FPGAs, and SoCs. The supply voltage range is 1.8V to 3.3V, covering common core and I/O voltages without an extra regulator.