Skip to main content
Log in
Microchip Technology DSC1001BI2-009.6000 — Crystals & Oscillators

DSC1001BI2-009.6000 MEMS XO – 9.6 MHz, CMOS, AEC-Q100

MPNDSC1001BI2-009.6000
Active

Microchip Technology DSC1001 series, XO (Standard) MEMS oscillator, 9.6 MHz CMOS output, ±25 ppm stability, -40 to 85°C, AEC-Q100 qualified, Standby (Power Down) function, 4-SMD no-lead package.

Microchip Technology DSC1001BI2-009.6000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001BI2-009.6000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency9.6 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

MEMS oscillator with automotive-grade timing

The DSC1001BI2-009.6000 is a MEMS-based XO (Standard) oscillator from Microchip's DSC1001 series, delivering a 9.6 MHz CMOS output with ±25 ppm frequency stability. It operates from 1.8V to 3.3V supply and draws a maximum of 6.3 mA — the standby (power down) function drops that to 15 µA, which matters for battery-backed or ignition-off modules.

Package and board-fit details

Housed in a 4-SMD, no-lead package measuring 5.00mm x 3.20mm with a seated height of 0.90mm — a standard footprint that matches many 5x3.2 mm oscillator pads, so a layout swap from a quartz-based XO to this MEMS part is usually a drop-in. Surface-mount mounting, supplied in tube — the tube orientation is consistent, but if your pick-and-place feeder expects tape-and-reel, confirm the packing option at RFQ.

Frequently asked questions

How can I order DSC1001BI2-009.6000 or check stock and pricing?

The part is Active and available through our independent distribution network. Submit an RFQ with your target quantity — we confirm availability and current pricing at quote time. No stock-holding claim; each order is sourced to your BOM.

Is DSC1001BI2-009.6000 a MEMS oscillator?

Yes — the base resonator is MEMS, not quartz. That means it is inherently more shock- and vibration-tolerant than a crystal-based XO, and it starts up faster with no warm-up drift.

Does DSC1001BI2-009.6000 have a standby (power down) function?

Yes, the standby (power down) function disables the output and drops supply current to a maximum of 15 µA — useful for battery-save modes in automotive or portable systems.