Microchip DSC1001 series MEMS XO, 1 MHz CMOS output, ±25 ppm stability, 1.8–3.3 V supply, AEC-Q100 qualified, 4-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 1 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Housed in a 5.0 mm × 3.2 mm 4-SMD no-lead package with a seated height of 0.9 mm, this footprint matches the industry-standard 5×3.2 mm oscillator land pattern — a drop-in replacement for quartz XOs of the same size.
Supplied in tape and reel (TR) packaging for automated pick-and-place.
Yes, the DSC1001BI2-001.0000T is rated AEC-Q100, making it suitable for automotive applications that require the temperature grade, reliability stress, and PPAP documentation that qualification entails.
When the standby (power-down) function is enabled, the disable current is 15 µA max. Active current is 6.3 mA max.
The DSC1001BI2-001.0000T uses a MEMS resonator instead of a quartz crystal, but it is pin-compatible with standard 5.0 mm × 3.2 mm 4-SMD oscillator footprints and outputs CMOS levels — it can replace a quartz XO in the same land pattern without a board spin.