Microchip Technology DSC1001BI2-001.0000, XO (Standard) MEMS oscillator, 1 MHz CMOS output, AEC-Q100 qualified, standby power-down, -40°C to 85°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 1 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001BI2-001.0000 is a 1 MHz MEMS-based XO (Standard) oscillator from Microchip Technology, delivering a CMOS output in a 4-SMD no-lead package.
A standby (power-down) function drops the supply current to 15 µA max when the enable pin is deasserted, compared to 6.3 mA max during active operation. The wide supply range of 1.8V to 3.3V lets it run from a common 3.3V or 1.8V rail without an extra regulator.
Yes, the function is listed as Standby (Power Down). When disabled, the maximum supply current drops to 15 µA, compared to 6.3 mA during active operation.