Microchip DSC1001 series, XO (Standard), 15 MHz, CMOS output, ±50 ppm stability, 1.8V–3.3V supply, AEC-Q100, -40°C to 85°C, 4-SMD no-lead package, Tape & Reel.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 15 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The 4-SMD no-lead package (5.00 mm × 3.20 mm footprint) is a common land pattern.
Operating from 1.8V to 3.3V, this oscillator covers the three most common digital supply rails without a separate regulator. At 15 MHz the max supply current is 6.3 mA; in standby (power-down) mode the disable current drops to 15 µA — useful for battery-backed RTC or wake-up circuits where the oscillator idles between active periods.
The evidence does not explicitly list RoHS compliance, but as an active Microchip product in a standard 4-SMD package, it is expected to meet current RoHS requirements. Confirm with the datasheet or your Microchip representative for formal certification.